Warrior stance keyb...
 
Notifications
Clear all

Warrior stance keybinds?

Page 1 / 2
(@mangleyong)
New Member

Hello, fellow warriors! I am having a hard time working out some good keybinds for my stances. What are yours? I have used Ctrl E, Ctrl F and Ctrl C before, but they feel very clunky. Give me some inspiration :wink:

Quote
Topic starter Posted : 14/08/2019 3:05 pm
(@nenski)
Trusted Member

I've seen everything from {1,2,3} to {SHIFT X, Y, Z}.

While I've retired from my warrior, it's important to note that a lot of the time I would stance swap by using some sort of macro. It was very rare for me to actually manually switch to, say defensive stance -- as an example, against a rogue -- where I would 1h/shield macro swap to defensive stance.

Consider all your abilities in which you're swapping to where a macro could be put in place. A player could tap the same button multiple times for multiple spells, versus manually swapping between a stance and using an ability.

ReplyQuote
Posted : 14/08/2019 3:43 pm
Tamul Brokenhoof
(@tamul)
Estimable Member

1, 2 & 3 can be easy to use, even F1, F2 & F3.
Rotation for warrior is really easy, Arms and Fury have 2-3 keys which can be used on Q, E & R.
Prot, well, that's another level, I've never tanked before, this is gonna be my first time, so I'll keep you on touch with it.

ReplyQuote
Posted : 14/08/2019 4:47 pm
(@stfuppercut)
Noble Member

SIde buttons on mouse / mousewheel. Alt/shift modifiers. F1/2/3. Foot pedals underneath your desk. Macros that bind certain abilities with shifts. Tons of options.

ReplyQuote
Posted : 14/08/2019 5:02 pm
(@pippina)
Noble Member Moderator

I always liked using F1/F2/F3 for my stances. Right next to the action keys and I never needed to target my party members as a warrior anyway.

ReplyQuote
Posted : 14/08/2019 5:04 pm
(@linguine)
Reputable Member

Source

It is photoshopped but actually quite a nice idea.

ReplyQuote
Posted : 14/08/2019 5:51 pm
(@gensei)
Reputable Member

Mouse side buttons. Only need 2 of them b/c you'll be in one of the stances already.

ReplyQuote
Posted : 15/08/2019 4:37 am
(@roadblock)
Trusted Member

I'm using F1/2/3 as a previous poster mentioned.

ReplyQuote
Posted : 18/08/2019 3:10 pm
Lucif3rX166 reacted
(@gensei)
Reputable Member

Mouse side buttons. Only need 2 of them b/c you'll be in one of the stances already.

You just remined me of trying that out when it releases. Thing is it's gonna need a macro, cause the only bar that changes with the stance is the main one, wasting you 2 useful slots

Not if you use a bar addon. You like Bartender/Dominos/whatever will let you switch as many bars as you need when changing stance.

ReplyQuote
Posted : 18/08/2019 3:11 pm
(@daisykutter)
Estimable Member

For me my favorite way was using a macro that just switched instances depending on the one you were; I binded it to shift+mousewheel up or down. If you were on Battle down was Defensive and up was Berserker, if you were on Berserker down was Defensive and up Battle, and if you were on Defensive down was Battle and up Berserker.
I loved that macro for tanking

ReplyQuote
Posted : 18/08/2019 3:33 pm
Caspus
(@caspus)
Estimable Member

My Combat to Beserker stance and back to combat was on Q.

4 was my defense bind and then Q to combat or Shift Q to berserk from Defense.

I would recommend the mouse wheel if you have a good mouse, if not or if you're not comfortable (like myself) then go with keyboard binds close to your fingers with little movement.

Mouse wheel binds are extremely faster than keyboard binds but little room for error. (Like if you're drunk it'll be a circus ride for you).
Keyboard binds aren't as easy to mess up but not as fast as the mouse wheel.

ReplyQuote
Posted : 18/08/2019 4:29 pm
(@charlemagne)
Active Member

Like some others have said in this thread, I think shift/alt modifiers are the best way to handle stances, this way more binds are freed up for your standard abilities. My stances will probably be on either Shift+1/2/3 or Shift+Q/W/E, something in a straight row corresponding to the stances on the stance bar.

ReplyQuote
Posted : 18/08/2019 4:41 pm
(@lendryn)
Estimable Member

ctrl+ A,S,D works for some people.

This guy posted some really high tech macro-based stance dancing stuff on reddit a while back:
https://www.reddit.com/r/classicwow/comments/cl85ma/warrior_stance_dance_complete_macro_suite/

Personally I think it looks way too cumbersome. Using Alt+ modifiers constantly to use anything in defensive stance just so you can switch a little bit faster doesn't seem worth it at all. I know some people would do stuff like this but only macro it to one ability, i.e. mash Overpower when you want to switch to battle-stance. I'm not sure if a stance switch and a stance-locked ability can be done in one keystroke.

ReplyQuote
Posted : 18/08/2019 4:48 pm
(@fthforever)
Estimable Member

I dont really like stanceswitch + ability macros, (even though I use one button shield wall and such) so for me it has been ^ for battle stance followed by F2, F3 and if needed (druid for example) F4+. I don't like using F1, because its deep in my muscle memory that F1 is target yourself.

I use ^ as the main stance (or wand on priest/mage/lock) because I played rogue for a long time and it was my stealth keybind. And I use the same keybinds for all classes (may not use some if there are too many).

There are really cool macros for spell interrution on warrior btw!

Nethertheless, for paladin I would suggest using key modifier + mousewheel, because its handy to tab through your auras.

ReplyQuote
Posted : 19/08/2019 1:22 pm
Caspus
(@caspus)
Estimable Member

Source

It is photoshopped but actually quite a nice idea.

Memes aside, I would actually use this. I feel like I can get this down easily and be able to stance dance faster than a keyboard bind.

ReplyQuote
Posted : 19/08/2019 2:16 pm
(@pippina)
Noble Member Moderator

Memes aside, I would actually use this. I feel like I can get this down easily and be able to stance dance faster than a keyboard bind.

Here you go then:

https://preview.tinyurl.com/y3d9lhtt

It's a Lemo 1640835 and it is $40 on amazon. And you can get it this wednesday :lol:

Edit: Guess barrens chat blocks Amazon links. Probably a good idea to cut down on spam, lol. Added a tinyurl work-around to get the link through.

ReplyQuote
Posted : 19/08/2019 7:43 pm
 Cook
(@cook)
Active Member

For me my favorite way was using a macro that just switched instances depending on the one you were; I binded it to shift+mousewheel up or down. If you were on Battle down was Defensive and up was Berserker, if you were on Berserker down was Defensive and up Battle, and if you were on Defensive down was Battle and up Berserker.
I loved that macro for tanking

This is minimal and perfect, can you share the macro?

ReplyQuote
Posted : 20/08/2019 1:33 am
(@daisykutter)
Estimable Member

This is minimal and perfect, can you share the macro?

I will look for it and post it here

ReplyQuote
Posted : 20/08/2019 8:39 am
(@crayon)
New Member

For me my favorite way was using a macro that just switched instances depending on the one you were; I binded it to shift+mousewheel up or down. If you were on Battle down was Defensive and up was Berserker, if you were on Berserker down was Defensive and up Battle, and if you were on Defensive down was Battle and up Berserker.
I loved that macro for tanking

This is minimal and perfect, can you share the macro?

daisyKutter probably have a better version, but think these two should do the trick! Just pop them on the bar and bind the keys to mousewheel up/down respectively.

For mousewheel down:

#showtooltip
/cast [stance:1, mod:shift] defensive stance; [stance:2, mod:shift] battle stance; [stance:3, mod:shift] defensive stance

For mousewheel up:

#showtooltip
/cast [stance:1, mod:shift] berserker stance; [stance:2, mod:shift] berserker stance; [stance:3, mod:shift] battle stance

removing this part will make it swap with the key that is bound. , mod:shift

ReplyQuote
Posted : 20/08/2019 10:10 am
(@ariba)
Estimable Member

A, S and D.

ReplyQuote
Posted : 20/08/2019 11:26 am
Page 1 / 2